Merry Christmas and Happy New Year. And a Little Present

Everyone is wishing each other Merry Christmas, or Happy Holidays or whatever, here comes mine with a little present in case you wanna have some Revit fun this holidays
Català - Castellano - Deutsch
So what is the present? Well I was wondering what could I model to make a Christmas card and thought, let's do it by learning some stuff modeling a cool and not "normal building". And I ended up with the Collserola Tower in Barcelona by Foster and Partners. The model is not finished, some parts are still in "Conceptual Mass Mode" but in case you feel like playing with it, here it is. Happy holidays everyone, enjoy friends, families, big meals and parties. Let's continue the conversation in 2014!

If you want to check the in-process model, here it is!

Cheers!
Show me more...

Revit: Creating a Basic Wall with Stacked Materials Using the Split Region Tool

Basic walls can behave like stacked walls in certain way if you know how to use the Split Region and Merge Tools.
Català - Castellano - Deutsch
Some walls we create might have on one side or the other a change in materials due to several reasons (some waterproofing on the lower part, a wainscoat, etc). If this happens in many walls, we mmight want to model the wall with this change of materials, and we all hate Stacked Walls. So no problem, we cana ctually do it with Basic walls and here is a step by step on how to do it in Revit.

For this example I will use a wall I am using in a project nowadays, it is made of brick as a core layer and it is finished on one side with a sort of Stucco-like material, and the other with waterproofing material. The thing is, the wall is used for a raised floor over a parkign garage, and below the level where the earth fill goes, instead of the stucco-like material, we need to have the same waterproofing we have on the other side. Since the height of this situation is fairly the same everywehere, I wanted to have the two layers (waterproofing until 1m of height and Stucco from there on). Let me show you a couple snapshots of the wall and you will see the final result.

How do we achieve this? Let's see it, the help on using the Split Region Tool found on the Revit Help gives us some hints, but not a good enought explanation as I see it. The Split Region process is a bit un-intuitive. There are two ways to achieve the same:
Option 01: Use Split Region + Assign Layers
Option 02: Create the Two Layers + Use Split Region + Merge Regions

I was going to write each step with snapshots, but I think a quick video will be moe helpful, so here it is. Sorry for the low resolution.

Hope this helps.


Show me more...

MT - Using BIM as a PM Tool: 2.- Literature Review

Due to the scope of this dissertation, three main topics were identified, and relevant literature for each of them has been analyzed. The topics are:
  • Project complexity and inter-organizational collaboration
  • The role of BIM in improving the delivery of construction projects
  • The current status of BIM and other ICT in the AEC Industry
Literature for each of these topics will be critically reviewed in the following sections. On the final summary of this chapter, links between the literatures will be drawn and conclusions from these links will be used to design the research methodology and to suggest further topics for research out of the scope of this dissertation.

Let’s start with the first topic for it has a wider scope and will help us understand the overall framework in which BIM has a role to play and the gaps in current practice that could be bridged by the correct implementation of BIM.

<-- Previous....................................................................................................................Next -->


Show me more...

BIM Management Postgraduate Course in Barcelona in 2014

BIM Education in Barcelona, and I'll be one of the teachers!
Català - Castellano - Deutsch
When I came back to Barcelona from Germany three and a half years ago and started talking to people about BIM, I mostly saw puzzled faces and "what is he talking about?" looks. Spain AEC industry lags behind in innovation compared to other countries, and BIM has not been an exception. Despite this delay, 2013 has been the first year when I can say (considering my profesional Network) that BIM is becoming a topic everyone has heard about and many people want to learn. Let me tell you some of the things that happened in the last months related to BIM:
  • In June 2012 the Spanish Chapter of Building Smart was created.
  • In May 2013, the First Spanish BIM Convention took place in Valencia
  • The Summer of 2013 the Catalan Public Infrastructure Agency (GISA) has already mentioned BIM as a plus point to be considered in the competition for the design and construction of a Public School near Barcelona.
  • In November 2013, Building Smart Spanish Chapter has started the creation of the "Guía de Usuarios BIM", or BIM users guide, based on the Finnish BuildingSmart COBIM Requirements. (I am actually helping on that)
Companies small and big, specially those working abroad, are starting to get from their clients or potential clients the "I want you to work in BIM". So people are looking around and asking where can I learn BIM? Well, people tend to jump into learning BIM by joining a Revit / ArchiCAD / Allplan / Bentley Course. And of course they learn to use those tools (they actually learn to navigate the interface and play with some tools) but they actually don't learn much about BIM as a process. Me and those who've been longer working in BIM environments have been repeating non-stop the karma BIM = Process / Revit;ArchCAD;Allplan = Tool and finally it seems this is already widely understood around here. So people want to learn more about the process itself, and me and some colleagues are going to make it happen:

Starting in 2014, UPC Barcelona will be hosting a Postgraduate Course about BIM Management called: BIM Management. Multi-platform Management of Building Information Modeling. The course will be in Spanish for now as it aims to the local professionals. Hopefully we will make it good enough to turn it into a full Postgraduate Degree. You can read more about the course [in Spanish or in Catalan] here. Please feel free to forward the link to anyone who you think will be interested.


Show me more...

Creating Flat Roof Slopes in Revit

Step by step on how to create the slopes of a flat roof in Revit
Català - Castellano - Deutsch
How do we create the slopes of a flat roof in Revit? Ok let's see what a flat roof is made of mostly:
  • A layaer of Light-weight / celular concrete to give the slope to the roof.
  • Several layers of waterproofing, insulation, finish, etc.
Yes I kept it simple, for this I don't care if the roof is finished with gravel, tiles or just the waterproofing. The important part is the Lightweight concrete layer. So first step, let's create the roof with this two layers, something like this (naming is in Spanish):

If we now want to create the roof slopes we have to do two things:

  1. Manually set the heights of the points we want to set higher or lower than the default roof thickness. To do this, we select the roof object and click on Modify Subelements:

    After clicking this, we can on a floor plan for instance, select the existing points and manually change their height. we can also do it by dragging the point up or down on a view)

    Once we've set the heights we want to create the slope, we can check on a section view how does it look like. If you followed these steps it will look something like this:

    As you can, see, the solpes are fine, but the problem is that the underside of the roof is also sloped, which we don't want, since the underside should be flat. Here comes step two:

  2. The simple step we need to do to fix this is to Edit the roof Type and tell revit we want the Lightweight Concrete Layer to have a variable height. So edit the roof family type and click on this:

    These should be the results (or something similar)

Don't remember where I saw this, I think it was at RevitForum


Show me more...

BIM Related Free Live Feeds from Autodesk University 2013

Free Live BIM related lectures from Autodesk University 2013.
Català - Castellano - Deutsch
If you, like me, couldn't make it to #AU2013 (no time, no money, no holidays, no sponsor, non of it?) you can still check some of the lectures online for free. Here a compilation for you to easily schedule. Since I am lcoated in Barcelona, and this list is as much for you as it is for me, all times are both in PST (The time in Vegas) andCET – Central European Time. Here comes the list of BIM related Lectures:

Tuesday, December 3rd, 2013:

Wednesday, December 4th, 2013:

Thursday, December 5th, 2013

And all this is also easily visible in this quick Google Calendar I just created:

Heads up via "The Revit Kid".
Show me more...